It will take no more than two hours to make a magnet, and the craft needs to dry for another day. At first, the souvenir smells strongly of glue, but after a couple of days a pleasant coffee aroma returns to it.

To create a beautiful and unusual heart you will need:

1. A sheet of paper in a cage
2. Simple pencil
3. A sheet of thick paper (you can use packing cardboard)
4. Magnetic tape (approx. 3x3 cm)
5. Transparent glue (for example, "Moment Crystal"
6. Grain coffee - about 3 tbsp. l.
7. Piece of satin ribbon (2.5x10-12 cm)

Step 1. Make a pattern and base of the future magnet

To make the heart proportional, draw a sketch on paper. To do this, fold the notebook sheet in half. Note the estimated width and height of the heart. Draw a half heart, cut and unfold. Press the pattern against the cardboard, trace the outline with a simple pencil and cut out.

Step 2. Cover the base with coffee beans

Before proceeding to pasting the base with coffee beans, they need to be sorted into small and large ones. Since the coffee bean coating will be two layers, select the very best for the top of the product.

Glue the contour of the product and begin to lay the coffee beans neatly with the convex side up. They should fit snugly against each other, protruding slightly beyond the edges of the base. Then fill in the entire base, for this, apply a thick layer of glue to small areas of the cardboard blank and immediately lay out the coffee beans.

Glue the second layer of grains so that they fill the voids of the first row. On the convex side of each grain, literally apply a drop of glue and connect to the bottom layer. At the end of the work, press the product firmly against the table with your palm so that the top layer of grains is evened out.

Step 3. Make a bow and decorate the heart

The texture of the coffee beans is beautiful on its own, so don't go overboard with the decorations. You can decorate a coffee heart with a simple flower or a bow.

To make a bow, cut two pieces from the satin ribbon - 8 and 3 cm long. To make the edges fall off, they need to be burned. Mark the middle of the long piece of tape. Fold the edges over to the middle. Sew a row of stitches in the middle of the tape, pull the seam and secure the thread.

Divide the smaller piece of tape into three parts along the length, fold one third of the length to the middle to the wrong side, coat with glue and press the second edge to the adhesive surface. We glue the resulting middle to the base of the bow.

Glue the finished bow to the coffee heart. You can decorate your coffee beans with glitter or spray paint on the surface. It is better to apply the paint with a sponge so that there are no drips.

Step 4. Glue the magnet

At the end of the work, glue a piece of magnetic tape or just a round flat magnet on the back of the product.

Dear needlewomen) I suggest you take a break from all the problems and troubles, look at the very beautiful works of the Polish craftswoman Anna Krucko and get inspired to create magnets in the shape of hearts from coffee beans. Hearts can be used to decorate any topiary to decorate the interior or use them as magnets for a refrigerator or hood in the kitchen. Many thanks to the author for the master class) By the way, many people asked me why my (previously made) coffee topiary shines. I answer: I lightly fry the coffee beans in a skillet with a piece of butter... By the way, I roast coffee not only for its use in art, but also for making a coffee drink. Any coffee beans, before grinding in a coffee grinder, it is advisable to roast with oil, then the drink will be even tastier and more aromatic)

Coffee magnets can be used to decorate a refrigerator or any metal surface in your kitchen interior. The coffee magnet can also be placed on coffee topiary, which in turn can decorate any kitchen, regardless of its style, be it modern or classic. By the way, you can buy or order very beautiful ones from Belarus in Moscow on the website of the "Kuhnev" company. There are kitchen sets and quality kitchen furniture at affordable prices. There is a large selection in the company's catalog, take a look)

For work we need: cardboard, cotton pads, threads, brown paint, coffee beans, glue and a magnetic sheet

Cut out a heart of the desired size from cardboard

We glue the cardboard heart with cotton pads, they are needed to give the workpiece volume

We glue the cotton pads and cut off the excess

Now we wrap the heart with thread or yarn

We glue the cardboard, to which we then glue the magnetic sheet

We paint the heart with any brown paint

Using a heat gun and hot glue, glue the coffee beans

We glue a heart cut from a magnetic sheet

In this embodiment, the heart is decorated with lace and sprinkled with ground coffee on top (the gaps between the coffee beans are preliminarily greased with glue)

In this small master class you will see how quickly and easily it is to make an original heart magnet for a refrigerator. Such a magnet can be used as inexpensive and unique, or you can leave it in your collection of magnets that decorate the door of your home refrigerator.

Materials for the master class:
- a foam tray (this is usually sold in fruit or cookie stores);
- coffee beans and spice - cloves;
- glue Moment;
- acrylic paints of brown and pearl color;
- stationery knife;
- brushes;
- pencil;
- magnet.

So let's get started:
1. Draw a heart on a foam tray with a pencil, if at the same time it turns out to be uneven, you can easily correct it.

2. Using a clerical knife, cut out the heart.

3. Cover it with brown acrylic paint.

4. Slowly, paint over the heart from all sides, paying special attention to the sides.

5. Attach coffee beans on top of the heart using Moment glue.

6. First, we mark the outline of our heart in a circle with coffee beans, then fill the core with them. As a result, the entire surface of the heart should be covered with coffee beans.

7. Now the small voids between the coffee beans need to be filled with cloves. If the legs of the carnation are too long, you can break them off a little.

8. Smear the legs of the cloves with glue.

9. And glue the clove between the coffee beans.

10. We paint the heads of carnations with acrylic paint of pearlescent color.

11. We take the magnet. Apply Moment to one of its sides with glue and wait 5 minutes.

Handicraft workshop. Coffee magnet "Kitten with a ball"

This master class is intended for educators, teachers, senior preschoolers, junior schoolchildren, as well as those who like to decorate the interior with their own hands, create original gifts. A kitten made according to this master class can become a wonderful gift or interior decoration, taking pride of place on the refrigerator.
Target: obtaining the skills of making the "Kitten with a ball" coffee magnet.

Tasks:
- to teach how to make crafts from coffee beans;
- develop fine motor skills, creative imagination, imagination, aesthetic taste;
- to educate perseverance, accuracy, interest in working with coffee beans.

The kitten fiddles with a ball:
It will creep up to him secretly,
Then it starts throwing itself on the ball,
Will push him, jump to the side ...
Can't guess in any way
That here is not a mouse, but a tangle.

Barto A.L.
For work we need:
- paper,
- thick cardboard,
-watercolor,
-brush,
-scissors,
-jute twine,
-coffee beans,
- glue "Moment-crystal",
- nail polish (pink color),
-sisal,
- eyes,
-decorative ball,
- satin ribbon or organza,
-painting in a spray can (silver color),
-glue gun,
-magnet

Today I bring to your attention mk for the manufacture of coffee magnet "Kitten with a ball"
To create it, you need to draw a pattern on a piece of paper and cut it out.

Then transfer the pattern to thick cardboard

Cut out

We cover all the details with watercolor on both sides, mixing brown with black, trying to choose a shade close to the coffee beans. This is necessary so that there are no gaps when gluing the grains.

While the paint is drying, you can spend a physical minute with the children:

Pussy
It will bend
It will arch the back
Pull the foot forward -
It does charge
Our Marquis -
Fluffy cat.
He scratches himself behind the ear,
Blinks her eyes and hums.
The Marquis is all right:
Claws, fur and appetite.

We glue all the parts of the cat and start decorating with coffee beans. We lay the grains in a stripe upward, trying to select them in size so that the gaps between them are minimal

Here's what happened

To create a mustache on the muzzle, we glue sisal. You can also use fishing line

Next, we make cheeks from two coffee beans turned upside down. We glue them on the mustache

We glue the spout

and cover it with nail polish

We glue the eyes

We attach a bow to the tail, give a ball into the cat's paws. I covered it with spray paint to make it brighter. The ball is best placed on hot glue, it will be more reliable. Optionally, the bow and ball can be decorated with sparkles, which I did

It remains to attach the magnet to the inside with a glue gun

And the kitten is ready!

Seals can be different, but everyone has a unique coffee aroma!

Thank you for the attention!
I wish you creative success!