Our grandmothers loved carbonated water, and now not only children, but also adults enjoy it. Today, a huge range of products of this type is presented on the shelves of stores. But it is not always possible to buy carbonated water, which would be both healthy and tasty at the same time. But you really want to quench your thirst in the summer heat with a cool soda. This does not mean that you need to completely abandon the yummy so beloved by everyone. You can also make soda at home. It's about how easy and inexpensive to prepare your favorite drink.

Theory

In fact, making soda at home is not difficult at all. It is enough just to study a few recipes, which are based on carbon dioxide CO2. This component does not burn, does not smell, it has no color, and on top of that, it has the greatest weight than the same oxygen. Moreover, CO2 dissolves quite quickly in the liquid and makes the drink slightly acidic.

It was on this principle that soda was made in the former USSR. Remember vending machines with drinks that could be found in those days on almost every street? Inside these machines, under pressure, CO2 gas was supplied to a tank with already sweet water, which, as mentioned above, was completely dissolved in it.

In order to make soda at home, you can use special cylinders or siphons. As for the latter, such equipment is available in any household store. By means of siphons, the necessary gas, in portions, enters the existing drink.

If you can’t buy a bottle or siphon to make soda, you can start producing carbon dioxide using improvised means. These include baking soda and vinegar. If you mix these two ingredients, then as a result a chemical reaction will begin, during which carbon dioxide is released. In order for the experiment to succeed, all the products used must be mixed in the following proportions: 1 liter of water + 7 tbsp. vinegar 9% + 2 tsp table soda. In addition to all of the above, you first need to prepare the following inventory:

• Polyvinyl chloride tube, the length of which reaches 1 m;
• Two plastic bottles (better if they are dark);
• Two lids. First, holes must be made in the plugs. Holes in their diameter should be less than the diameter of the tube.

Making sparkling water

So what is the right way to make soda?

• Take pre-prepared bottles. Fill one of them with water, and put acetic acid and soda in the second. Do not forget that the chemical reaction should not start immediately. It is for this reason that soda must be wrapped in a napkin and poured with vinegar. This way you won't be late with the corking of the bottle. Everything will be done until the moment when carbon dioxide begins to be released. Therefore, you will not lose a single part of this substance;
• It is also worth saying that the tube must be securely attached to the lid. This is necessary to prevent CO2 leakage;
  Instead of a paper napkin, you can use, for example, polyethylene or foil. Make holes in them so that the chemical reaction does not drag on for a long time;
• As soon as carbon dioxide begins to be released, it is necessary to shake the bottle well. The duration of shaking is at least 5 minutes. So, you can make the components interact as much as possible.

All of the above steps will allow you to make a lightly carbonated drink that can be varied by adding syrup or juice.

Classics of the genre - "Soda"

In order to make classic sparkling water at home, you do not need any special knowledge or unusual ingredients. So the first thing you need is water. It is best to pre-clean the liquid with a household filter.

At the beginning of the 19th century, in order to reduce the cost of producing carbonated water, chemistry began to be used in the manufacturing process. Soda was added to the water, which was previously mixed with acid. Sometimes one of the components of soda was also salt. Thus, the water received its portion of carbon dioxide and became carbonated. This cooking option is also suitable for home conditions.

The resulting drink will include sodium bicarbonate and acid residues. This means that such soda can hardly be called useful. You also need to understand that in the cooking process it is necessary to strictly follow the indicated proportions. Otherwise, you will get not only harmful, but also tasteless drink. Despite all the above, production costs are minimal.

How to make soda with a siphon?

Water is initially poured into the siphon, after which a balloon with food carbon dioxide is twisted. It is enough to wait a couple of seconds and you can enjoy the taste of an unsurpassed drink.

It is worth saying that the spill of sparkling water is very convenient. With one push of the lever, you can fill your glass with cool sparkling water. Moreover, you can store the drink under normal conditions and at the same time it will not lose its original quality.

If you use spring water as an ingredient, then in the end you will get a drink that will be similar in composition to natural mineral water. It will contain minerals and carbon dioxide bubbles that are extremely beneficial for the human body, which tend to refresh.

As for the financial side, this manufacturing method will allow you not only to enjoy the excellent taste of sparkling water, but also save money. 1 liter costs only 20 rubles. Compared to prices in shops and cafes, this cost is very small.

It is most convenient to prepare soda at home using a siphon. So this device is enough to purchase only once. The purchase will cost you approximately 1500 rubles.

So, as you could see, making soda at home is not so difficult. You can use improvised means or prepare and purchase a special siphon. In any case, by making carbonated water at home, you are guaranteed to get a drink that will be much healthier than the water sold in stores.

Pretty easy way to get soda at home. Based on the simple dissolution of CO2 in water. To do this, we will build a CO2 generator. Its work is as follows: when vinegar interacts with soda, CO2 is released, then it passes into the second vessel and there it dissolves in our carbonated liquid. Just isn't it?

We will need: vinegar, soda, a couple of plastic bottles, a tube, a piece of napkin or toilet paper.

Here is what we did:

As can be seen from the figure, two bottles are securely connected by a tube. Please note that in the second bottle where our carbonated liquid will be poured, the tube goes to the very bottom, and in the first bottle where the reaction will take place, the tube peeks out a little from under the cap.

We pour 100-150 ml into the first bottle. vinegar, in our second liquid, which we will carbonate. Close the second bottle tightly.

Then we turn in our toilet paper st. a spoonful of baking soda. This is done in order to pour soda at once and not lose CO2.

We throw and quickly close.

The reaction begins! For better absorption of CO2 liquid, it must be shaken, and also, to increase the reaction, shake a bottle of soda and vinegar. In short, it is better to shake both bottles alternately.

After a while, the reaction will end and you will get a soda made by yourself!

The first appearance of carbonated water dates back to the middle of the 19th century. Otherwise, it is called soda. Even then, consumers liked it with its unusual bubbles, pinching the tongue and so refreshing in the summer heat. And since then, soda has been a regular product on store shelves. There is nothing easier than buying a bottle of sparkling water, but not many people know that it is possible to make a prickly liquid at home.

How to make soda at home?

It's actually very simple! We take a glass of mineral water, add a teaspoon of soda to it, extinguish it with a couple of tablespoons of lemon juice or citric acid (0.5 teaspoon). Mix and you're done! And if you add a few circles of lemon and sugar - you get lemonade. With the addition of syrup or jam - a sweet drink.

Consider what other ways to get sparkling water at home:

• We mix three teaspoons of soda with five tablespoons of powdered sugar (you can add more or less sweetener according to your taste), add six teaspoons of citric acid. In a separate container, mix everything well, you can crush. After that, we fill it with water and a delicious drink is ready, and in taste it is in no way inferior to a store-bought product, or even better than it, due to the absence of harmful additives and dyes. Instead of water, you can use juice or fruit drink.
• Another way. We need two containers. Pour water into one and twist tightly. We make a hole in the lid and insert the tube into it so as to ensure tightness. Pour apple cider vinegar into the second container, at the rate of 100 ml per liter of the finished drink. Add two tablespoons of soda, close and insert the tube from the first container. Vinegar reacts with baking soda and releases carbon dioxide, which gasses the water.
• The easiest way is to use a siphon and a can of carbon dioxide. You need to fill the siphon with water, connect the spray can and the prickly drink is ready!
• Preparation of a drink by fermentation. We need 4 liters of cold water, 200 ml of warm water, yeast (5 g), a glass of sugar. You can add mint or tarragon herb. Yeast is dissolved in warm water, poured into cold. Add sugar and herbs to taste, pour into containers and leave in a dark, cool place for 5 days. Then the drink is ready.

As you can see, sparkling water can be not only purchased, but also prepared at home. Experiment with tastes, prepare various drinks and enjoy a product prepared by your own hands - it's always healthier! And it is especially tasty and healthy if the water for cooking is obtained from modern

A glass of tasty cool soda... Sometimes you really want to enjoy the taste of sweet water with gases, familiar from childhood. You can, of course, go to any store and buy a ready-made product. But often the quality and taste of the drink do not meet expectations. In this case, soda recipes that can be prepared at home will come to the rescue. This will require a minimum of time and a simple set of available ingredients.

Method 1

You will need:

• Water - 1 l.;
• Baking soda - 2-3 tsp;
• Citric acid - 5 tsp;
• Powdered sugar - 5-6 tsp;
• Lemon.

Mix soda and citric acid, crush well. You should get a homogeneous powder without lumps. Pour powdered sugar into the mixture. Add powder to water. You can add a little lemon juice to the finished drink. It is best to drink it chilled.

You can diversify the taste by mixing the powder with fruit drink or fruit juice.

Method 2

We will need:

• Cold water - 4 liters;
• Warm water - 200 ml;
• Sugar sand - 100-150 g;
• Brewer's or bread yeast - 1 tbsp.

Add yeast to a bowl of warm water. Wait 10-15 minutes until they dissolve. Then put sugar into the mixture, mix thoroughly until it is completely dissolved. Next, send the yeast composition to cold water and mix the solution thoroughly. Pour the liquid into a special container, close the lid and place in a dark place for 4-5 days. The drink is ready!

Method 3

Ingredients:

• Water - 1 l.;
• Berry juice or fruit drink - 100 ml;
• Vinegar - 100 ml;
• Soda - 2 tsp

Cool the water and mix with juice or fruit drink. Pour the liquid into the bottle, lower the tube into it and close the lid. Place baking soda and vinegar in a second container and follow the same procedure. Connect two containers with a tube: carbon dioxide formed during a chemical reaction can circulate through it. For the formation of "gas" you need to shake both bottles for 10 minutes. Carbonated water should be cooled and you can enjoy the taste.

Method 4

To prepare soda, you need to take:

• Water - 1 l.;
• Syrup from any berries - to taste
• Dry ice.

If you can buy dry ice, then making soda is not a big deal. To do this, stir the syrup in water and add a small cube of dry ice to it. Proceed with caution: do not touch the ice with your hands, you can injure yourself.

Making soda at home is quite simple. Try one of the suggested options: you will definitely like the taste.

In Soviet times, our kitchens did not have coffee makers, microwave ovens, or electric kettles. In a place of honor was another “unit”, which was available in almost every family - a siphon for sparkling water. And no wonder he took his place. In each city there were several "gas stations" for them. I brought it home, poured syrup or regular jam into a glass, added sparkling water from the siphon and got a magical drink. Many are interested in how to make soda at home now.

What you need now to get sparkling water

At present, if desired, water with gas can be made without any problems, as in the past. Now in special stores, supermarkets, a wide variety of siphons have again appeared.

They come in different shapes and colors, and you can always choose for yourself exactly what you like. There will be no problems with the purchase of spray cans. They are sold in the same stores. Let's make a list of what we need to get water with gas at home: a siphon, cans of gas for a siphon, water, syrup - in case we want to drink a sweet drink. At one time, transitional, some people tried to use cylinders from pneumatic weapons. But since they were filled with technical gas, and not pure, they were not very suitable. So we decided what we need to buy.

We buy a siphon for soda

When buying it, you need to pay attention to some nuances, given the large selection:

1. Adjustment of gas saturation is desirable. In this case, if desired, it will be possible to obtain both a slightly carbonated drink and a highly carbonated one.
2. When saturated with gas, a signal should be given. This feature will help you always get water with the desired degree of carbonation. A pleasant call sounded - the gas supply was turned off and that was it.
3. You can buy a soda siphon with automatic gassing at a predetermined level. This will be the perfect solution.

For information: current siphons are completely safe. The water tanks in them are environmentally friendly, only high-purity carbon dioxide is used in cylinders. The gas cylinder is removed completely safely, as the siphon automatically releases pressure when it is turned off. The latest siphon models are multifunctional devices, and not just a container and a cylinder with a tap, which, by the way, can be replaced with a new one and refilled at special points, the number of which is constantly growing.

Benefits of homemade soda

We have already figured out how to make soda at home. And why is it needed at all? After all, in stores now you can buy any water, for every taste. What are its benefits?

1. For a lower price we get more drink, that is, we save money.
2. We do not use cans or plastic bottles, which means we do not litter the environment.
3. We have a huge selection of flavors for water: natural, dietary, energy, fruit, tonic, iced tea and many others.
4. No need to carry heavy bottles from the store.
5. Siphons work without electricity and batteries, easy to operate.
6. They take up minimal space in the kitchen.
7. You can prepare a drink not only for every taste, but also for varying degrees of gas saturation.
8. The cooking process is comfortable and enjoyable for any member of the family, including children.

For these reasons, and a host of others, homemade soda is gaining more and more popularity.

Making soda from home products without using equipment

In the kitchen of any housewife there will always be ingredients with which you can prepare our favorite drink. First you need to remember what carbon dioxide is released from. This will happen if you drop lemon juice or vinegar on baking soda. We get an idea of ​​​​how to make soda at home. Let's give you two specific examples.

The first. We make the Baikal drink - our answer to Coca-Cola. To get three liters of drink, we take: St. John's wort, licorice, eleutherococcus, fir needles - only 10 grams each, a glass of sugar and half a lemon. Pine needles and herbs are poured for three hours with hot water. Then we filter the liquid, boil, pour sugar, cool, add the juice of half a lemon mixed with soda. Ready!

Second example. All catalysts in this method are mixed directly in a glass. We make fresh from the juicy pear fruit, dissolve sugar in it to taste. Squeeze the juice of a third of a lemon into this mixture. In a separate glass, pour a little soda and pour juice into it. Duchess is ready!

Preparing sweet soda

Knowing how to make soda at home, you can try to make syrup for it yourself to get a completely natural, home-made product. The first option is "Tarhun". For him, we need: a bunch of medium-sized tarragon, a glass of water and granulated sugar - 2/3 cup.

We wash the tarragon and cut into several pieces. We boil water, put our grass in it and cook on low heat for about 20 minutes. We cool, filter, dissolve sugar sand in the broth, put it on fire again. While stirring, wait for thickening and add lemon juice. The syrup is ready, it can be diluted with sparkling water to taste. In order to get a sweet soda of a different taste, consider another syrup recipe - Refreshing lemonade. Ingredients: sugar - one glass, for caramel taste you can take brown, water - one glass, lemons - 5-6 pieces, cinnamon - half a teaspoon. We mix water with sugar and cook the syrup, cool it. Lemon juice, you get about one glass, pour it into the syrup, mix again and add cinnamon. Cool - and the syrup is ready, you can dilute it with soda.

For carbonated water, it is recommended to use pressure-resistant bottles specially developed, including by siphon manufacturers. They have a shelf life of at least three years, hermetic lids can be of various shapes. It is recommended to buy gas cylinders made of lightweight aluminum. One bottle is most often enough to prepare at least 60 liters of sparkling water. Request: Buy these two items as a set. And your task, how to make soda at home, will be an easy task that even a first grader can handle.