Beef boiled soup

Frozen beef (Brazil's units Article 337375 - Metro Cah & Carry) - 25 kg Split a saw to a part of 3 kg. Dispatch Pandes (black garbage), tight and put on a washing bath in bathtubs. Pour water from under the tap at a temperature of 25 ° C. Check the temperature with a submersible thermometer. Over the course of two or three hours, change the water in the bath. After fully defrosting, the pieces of meat are placed in a gastronormability of 2/1, a depth of 400 mm and shut out the tank with the MaitreFoods meat softener in the amount of 3 grams per 1 kg. After half an hour after processing Maltodextrin, put meat in with boilers with water in proportion of 3 parts of the water for 1 part of meat, bring to a boil and cook for 5 hours at 75 ° C. Temperature to determine the thermometer. After the end of the cooking, give meat to cool in the broth. After reaching a temperature of 20 ° C to pack the meat with a broth portion into vacuum packages with a size of 250 * 400 mm 65 μm, seating with their cartridge by 50-60 grams using a CAS-400 model CAS. After sealing the packages are placed in a piping boiler or gastronomy with a thermostat SOUS-VIDE and is processed at a temperature of 85 ° C for 10 minutes. The packets are then removed and placed in an icy bathroom or gastronomy (water / ice ratio - 50/50). Ice bath temperature \u003d +1 ° C. In the process of cooling it is necessary to add ice, because The temperature in the bathroom will grow due to the fact that the packages are hot. Cooling cycle - not less than 30 minutes. After the end of pasteurization, the packages wipe dry with a rag and are marked with a gun - a label. The label should be the date of development, the sequence number of the cook - the blank, the expiration date date. The shelf life of meat is 4 days. The storage place is a medium temperature at a temperature of +2 ° C.

Broth for borscht

Bones fry in a saucepan with the addition of vegetable oil to golden color. In cold water put chicken bones, pork and roots of dill. Pepper Bulgarian cleaner, cut into large and put in broth. Garlic grate on a grater, closer in gauze and lay in broth. Cook for 3 hours on slow heat, then add vinegar, paprika and sharp pepper. Bring broth to taste and straighten through gauze.

Pampushki with sauce

Mix all the ingredients in terms of or in a planetary mixer bowl. Easy 15 minutes on small circulation in a planetary mixer or test. Range balls of 30 grams and put in a deep cast-iron frying pan, as in the photo, lubricated with vegetable oil. Lubricate with tassel milk. Bake at a temperature of 180 seconds in a parokonveloma or convection furnace for 20 minutes.

For the preparation of sauce - mix fine chopped garlic, salt, vegetable oil and water.

Beetter kvass

Beet Fresh is diluted with water in the proportion of ¼. Boil. Cool. Add sugar, salt, citric acid in the proportion of 1/10 from the volume of the emulsion. Give cool. Pour the packages for ice. Freeze in the shocker for 120 minutes. Remove storage in the freezer.

New service

Rent programs Master TTK

Then it is necessary to enter the recipe of raw materials, specify the weight of the semi-finished products (if any) and enter the dish. After that, the user performs actions consistently pressing on bookmarks

Development of TTK (Fig. 2)

The whole process of developing and calculating TTK takes only 10-15 minutes. Finished technical and technological map is displayed.

Technical and technological card (sample for catering) Fig. 3.

Work with technological maps

To calculate and design technological maps, the user opens the magazine of technological maps and selects a dish (product) recipe. Then the dish and the number of servings are indicated. After the technological map is displayed.

Technological card (Fig. 4)

When calculating a technological map it is possible to change the dish output with automatic recalculation of the raw materials of gross raw materials. Recalculation of the rules of bookmarks for seasonal types of raw materials (potatoes, carrots and beet) is made automatically depending on the season. Technological maps are stored in the TC magazine.

After specifying the outlet of the dish for the technological card, an information sheet is automatically created, in which the food and energy value and the content of vitamins and minerals on the dish is calculated.

Information sheet (Fig. 5)

Development Menu-Requirements

For enterprises engaged in the organization of school food, the program provides for the development of menu-requirements. To compile menu-requirements, the user presses in the MT button toolbar. Opened Menu Menu-Requirements.

Menu Menu-Requirements (Fig. 6)

When creating a new menu-Requirement, the user indicates the age group, the number of customizable, day number in the ten-day menu, etc.

Settings Menu-Requirements (Fig. 7)

The user then opens the menu plan and selects an assortment set of dishes for the day, pointing out the dish and the name of the food acceptance.

Selection of dishes (Fig. 8)

When adding dishes automatically analyzes the distribution of daily diet for food intakes in the percentage ratio and the implementation of the total daily diet. In the event that the norm is performed, the column of the Plan / Fact is highlighted by green, if not - red.

Analysis of the distribution and implementation of the daily diet (Fig. 9)

After the selection of dishes is completed, all documents are created and output automatically.

Menu (Fig. 10)

Information sheet (Fig. 11)

Calculation card (Fig. 12)

Requirement-overhead (Fig. 13)

Development plan menu

To draw up a menu, the user presses the PM button in the toolbar.

Magazine Magazine (Fig. 14)

In the settings window, the user enters the name of the menu and the execution date.

Settings Plan Menu (Fig. 15)

Then you need to open the menu plan and select an assortment set of dishes.

Selection of dishes (Fig. 16)

After the selection of dishes, all documents are created automatically.

Plan menu (Fig. 17)

Calculation card (Fig. 18)

Requirement-overhead (Fig. 19)

Calculation of the dietary menu (Fig. 20)

Drawing and calculating the menu

Also in the program "Master TTK" 2.0 provides for compilation and calculation of the menu with the calculation of the food and energy value and the cost of dishes.

Menu (Fig. 21)

To combine the work of the program "Master TTK" 2.0, a data export module has been developed, which is designed to unload data to format.xls

System requirements:

The program has a local and network version.
Operating system: Windows 7/8/10
Processor: not lower Intel Pentium2 266MHz
RAM: 128MB
Screen resolution: at least 1024 x 768
Free Hard Drive: 50mb

Price: 14900.00

Organization:
LLC "Stopits" Krasnoarmeysky Rapipo 09/10/2007

Contact:
Bardassova Lyudmila Leonidovna, director

Organization:
OJSC "Ob", Novosibirsk. 03.11.2006

Computer program "Master TTK" in our company is used a little longer than six months. Technologists have mastered it very quickly and can now not only receive a ready-made technological map for 10-15 minutes, but also automatically draw up a menu plan with a consolidated statement of raw materials, calculation cards, edible diet.

Despite a short period of time, we managed to significantly tighten technological issues. During this time, we have changed the menus three times and all the dishes themselves developed technical and technological maps with the calculation of fluhyme, calorie and microbiology indication. Now in the workplace of the cooks, not only technological maps are hanging, but also colorful photos of finished dishes. And chefs are convenient, and checking in delight!

But the most important thing, we managed to optimize the norms of investment and losses, taking into account the use of paroconbection and new types of raw materials. At the same time, the cost of dishes significantly decreased and the situation with the preservation of goods and material values \u200b\u200bin production improved: after all, all recipes are not taken from the collections, but are compiled on the basis of control workflows that are very easy to perform in the program. In my opinion, the cost of the program is incomparable with the economic effect of its application.

Contact:
Melnikov Sergey Petrovich, Power Director

Organization:
Novosibirsk State Technical University 12/28/2006

Two years ago, 2004, computer programs for technologists, developed by the Novosibirsk Software Expert Soft, caused great interest among teachers of the Department of Technology and the Organization of Food Products of the Novosibirsk State Technical University. Today, catering and food industry enterprises need qualified, well-trained professionals who have new knowledge and modern information technologies. That is why computer programs "Master Technologist" successfully apply to our department in the process of training students and advanced training of specialists of the food industry and catering. The department is equipped with a computer class where these programs are installed. During the preparation of course, thesis, the passage of industrial practice, students independently make up production programs, accounting statements and movement of raw materials, count the TTK, draw up technological instructions, quality certificates, calculate the diet, etc. Working with programs is easy and quite interesting. Experts have the opportunity to further systematize and update the knowledge gained, since programs are developed on the basis of current consumer reference books, food, standardization technologies, etc. But the most important thing is correctly calculated and flawlessly decorated technological standards for which you can not only certify products, But also to optimize the production processes of the real enterprise. In addition, the Master Technologist program has been introduced in the practical activity of the SHSTU Sports and Health Camp NSTU, which is the basis of the practice of students students in the specialty 260501 - Catering Food Technology. The department, for prompt planning by production with the help of a computer, a student of 4 or 5 years is appointed together with the practice manager develops a planned menu, a menu, tasks for harvesting and changing shops that are issued to students. The introduction of information technologies into the educational process and the practical activity of enterprises is a new step in the intensification of production processes to improve the quality of culinary products, the main factor of which is the development and implementation of NTD (regulatory and technical documentation.

Contact:
Glavcheva S.I., Head. Department, Candidate Economy. Science, Corresponding Member. Academy of Quality Problems of the Russian Federation

Organization:
Restaurant Japanese cuisine "Sushi Yama", Novosibirsk, 12/28/2006

The Master TTK program really justifies its appointment. With it, you can quickly bring all the necessary technological documentation in the proper form. As for the physicochemical indicators and the food value of the dishes that are calculated in the program automatically, I can say that the data calculated in the technical and technological maps that were compiled by me were fully coincided with the analysis of the analysis conducted by a special laboratory, and in inspectors Organs never arose complaints about technological documentation.

Contact:
Nikolai Ilyin, Chef

Organization:
SANEXPERT LLC, Saint Petersburg

A month ago, we leased the program "Master TTK", because We wanted to get acquainted in more detail with the program developed by the Novosibirsk company "Expert Soft".

There are several more companies on the market offering similar programs for technologists, but the "master TTK" arranged us more, both in terms of functionality and the price.

Convenient interface, operational technical support and price for us were decisive factors. In the future, we plan to purchase a version for permanent use.

Contact:
Leader: general director Vorobiev Evgeny Viktorovich

Organization:
LLC "Nakrap", Togliatti

The program "Master TTK" I use 10 years. A huge assistant, a very convenient and reliable program. All automated, the main thing is a convenient introduction of recipes.

My TTK in our Samara region is one of the best. And this is more thanks to the program. I used both the plans-menu, and the menu-requirements, very easily and convenient to work. And, most importantly, quickly. I am very pleased! And the staff is pleased, all applications are quickly printed with bookmarks on the ordered quantity, nothing to treat themselves.

Contact:
Deputy Director for the Production of Aleshina Irina Viktorovna

Any establishment of a catering is obliged to start technological maps - this requires the law. Today we will tell: what is technical machines, what they are and how to automate work with technological maps.

What is a technological map

In general, Tehkarta is a document containing information about the ingredients of the dish and the method of its preparation. It contains the following information:

• the number and name of products that are part of the dish;
• recipe;
• rules for registration and filing.

The procedure for compiling, maintaining and storing technological maps is regulated by GOST 31987-2012 "Catering Services". This document is mandatory for use in all catering enterprises, regardless of the ownership. The failure to fulfill this requirement threatens penalties in accordance with the Code of Administrative District.

Sample technological card

What technological cards are

Simple technological map - TC

Start on dishes prepared according to standard recipes. Such recipes are specified in culinary reference books and approved by the relevant gtales. In this case, simplified requirements are applied to the document: only the composition and recipe for cooking are indicated. At the request of the organization, you can specify nutritional value. Important moment: the Source of the Recipe should be specified in the TC. It may be a reference to the directory or GOST, of which it was taken.

Simple TK serve so that the catering companies do not inherit every time the bike. It makes no sense to develop in each dining room your own recipe for boiled potatoes - this process is template. The rules for the design of the TC on the simplified scheme are indicated in GOST 31987-2012 "Catering services".

Technical and Technological Map - TTK

And here everything is more complicated. Such a document is developed for each new dish, which is not in any directory. There is much more information here. In TTK, you must specify:

• the name of the organization that has developed a technical and technological map;
• application area. This point is written a list of catering establishments that can apply a recipe for themselves;
• requirements for raw materials. It indicates the list of accompanying documents, security confirmation and so on;
• name and number of ingredients;
• total mass dishes at the exit. In the process of preparation or thermal processing of the dish can lose part of the weight - this must be considered;
• full description of the technological process. All is taken into account: from the methods of cutting products before the heat treatment time. For each standard process, you need to specify a link to the GOST or the regulatory document on which it is carried out. Imported products use their recommendations;
• requirements for the design and rules for filing dishes, as well as storage conditions;
• quality and security parameters. This clause describes the appearance, food value of the dish, its taste and smell.

The TTK is developed by a responsible person and is approved by the head of the establishment of catering.

Technical and technological map of Greek salad

TK and TTK must be printed, have live signatures with seals and stored in an affordable place. They need to be submitted at the request of the auditory authorities.

Below you can download samples TechCart on some dishes and drinks:

Technological maps are compiled not only on catering products, but also in any other sphere where products from any raw material are manufactured.

Technological maps and commodity systems

Experience all the features of the Ekam platform for free

Privacy agreement

and personal data processing

1. General Provisions

1.1. An agreement on the confidentiality and processing of personal data (hereinafter - the Agreement) is adopted free and its will, operates in relation to all the information that Inseyls Rus LLC and / or its affiliates, including all persons in one group with LLC "Inseyls Rus" (including Ekam Service LLC), can receive a user during the use of any of the sites, services, services, programs for computer, products or services LLC Inseyls Rus (hereinafter - services) and During the execution of LLC Inseyls Rus »any agreements and contracts with the user. The consent of the user with the agreement expressed in the framework of relations with one of the listed persons is applied to all other listed persons.

1.2. The use of services means the consent of the user with this Agreement and the conditions specified in it; In case of disagreement with these Terms, the user must refrain from the use of services.

"Inseyls" - Limited Liability Company "Inseyls Rus", OGRN 1117746506514, TIN 7714843760, PPC 771401001, registered at the address: 125319, Moscow, St. Okademik Ilyushina, d.4, korp.1, office 11 (hereinafter - "Inseyls" ), on the one hand, and

"User" -

or an individual with legal relationship and recognized by the participant of civil legal relations in accordance with the legislation of the Russian Federation;

or a legal entity registered in accordance with the legislation of the state, the resident of which is such a person;

or an individual entrepreneur registered in accordance with the legislation of the state, the resident of which is such a person;

which adopted the terms of this Agreement.

1.4. For the purposes of this Agreement, the parties identified that confidential information is information of any nature (production, technical, economic, organizational, and others), including the results of intellectual activity, as well as information on the methods of professional activities (including, but not limiting: information about products, works and services; information on technologies and research activities; data on technical systems and equipment, including software elements; business forecasts and information about the estimated purchases; requirements and specifications of specific partners and potential partners; information Related to intellectual property, as well as plans and technologies related to everything listed above), reported by one side of the other party in writing and / or electronic form, explicitly designated by the party as its confidential information.

1.5. The following agreement is to protect confidential information that the parties will exchange during the negotiations, conclusions of contracts and fulfillment of obligations, as well as any other interaction (including, but not limited to, consulting, requesting and providing information, and the fulfillment of other orders).

2. Share Party

2.1. The factors agree to maintain in secret all the confidential information obtained by one side from the other side in the interaction of the parties, not to disclose, not to disclose, not to publish or otherwise not to provide such information to any third party without prior written permission of the other party, with the exception Cases specified in the current legislation when the provision of such information is the responsibility of the parties.

2.2. The party will take all necessary measures to protect confidential information at least with the use of the same measures that the Party applies to protect their own confidential information. Access to confidential information is provided only to those employees of each of the parties to which it is reasonably needed to fulfill official responsibilities for the execution of this Agreement.

2.3. Conservation in the secret of confidential information is really within the deadline for this Agreement, the license agreement on the computer program dated December 12, 2016, the contract of joining the license agreement for programs for computer, agency and other treaties and within five years after termination Their actions, if the parties separately will not be specified otherwise.

(a) if the information provided has become publicly available without a violation of obligations of one of the parties;

(b) if the information provided became known as a result of its own research, systematic observations or other activities carried out without the use of confidential information obtained from the other side;

(c) if the information provided is legitimately received from a third party without a commitment to maintain it in secret before it is provided to one of the parties;

(d) If the information is provided on the written request of the state authority, other state body, or the local government body in order to fulfill their functions and its disclosure to these bodies is required for the parties. At the same time, the party must immediately notify the other side of the received request;

(e) If the information is provided to a third party with the consent of the party, the information about which is transmitted.

2.5.Seils does not check the accuracy of the information provided by the user and does not have the opportunity to assess its capacity.

2.6. The information that the user provides Inseyls when registering in services is not personal data, as defined in the Federal Law of the Russian Federation No. 152-FZ dated July 27, 2006. "On personal data."

2.7.Seils has the right to make changes to this Agreement. When making changes to the urgent editorial board, the date of the last update is specified. The new edition of the Agreement enters into force on its placement, unless otherwise provided by the new version of the agreement.

2.8. After this agreement, the user realizes and agrees that Inseyls can send personalized messages and information to the user (including not limited to) to improve the quality of services, to develop new products, to create and send the user to personal offerings to inform the user about Changes in tariff plans and updates, to send the user marketing materials on the subject of services, to protect services and users and for other purposes.

The user has the right to refuse to receive the above information, reporting this in writing to the Email of Inseyls -.

2.9. When this agreement, the user is aware of and agrees with the fact that Cookies, counters, other technologies and the user have no complaints about Insiels to ensure the services of services as a whole or their individual functions in particular.

2.10. The user is aware that the equipment and software used by them to visit sites on the Internet can have a feature for prohibiting operations with cookies (for any sites or for specific sites), as well as removing previously received cookies.

Insiels has the right to establish that the provision of a specific service is possible only if the reception and receipt of cookies are enabled by the user.

2.11. The user is independently responsible for the security of their funds selected to access the account, and also independently ensures their confidentiality. The user is independently responsible for all actions (as well as their consequences) as part of or using services under the user account, including the cases of voluntary data by the user to access the user account to third parties on any conditions (including agreements or agreements) . At the same time, all actions within or using services under the user account are considered to be produced by the user themselves, with the exception of cases when the user notified Inseyls about unauthorized access to services using the user account and / or any violation (suspicions of violation) of their confidentiality of their Account access to account.

2.12. The user is obliged to immediately notify Inseyls about any case of unauthorized (not user-rescued) access to services using the user account and / or any violation (suspicions about violation) of the confidentiality of their account access to the account. For security reasons, the user is obliged to independently fulfill the completion of the work under its account at the end of each work session. Insiels is not responsible for the possible loss or damage, as well as other consequences of any nature that can occur due to the user's violation of the provisions of this part of the Agreement.

3. Conformance to Party

3.1. The fact that violated the obligation provided for by the Agreement with regard to the protection of confidential information transferred under the Agreement is obliged to compensate at the request of the affected part of the actual damage caused by such a violation of the terms of the agreement in accordance with the current legislation of the Russian Federation.

3.2. The damage does not cease the duties of the violating part of the proper fulfillment of obligations under the Agreement.

4.In the provisions

4.1.All notifications, requests, requirements and other correspondence under this Agreement, including those including confidential information, should be issued in writing and are awarded personally or through courier, or sent by e-mail addresses specified in the license agreement for computer programs from 01.12.2016, the contract of accession to the license agreement for programs for the computer and in this Agreement or other addresses that may be in the future in writing are indicated by the Party.

4.2. If one or more provisions (conditions) of this Agreement are either becoming invalid, it cannot be the reason for the termination of other provisions (conditions).

4.3. For this Agreement and relations between the user and Inseyls, arising in connection with the application of the Agreement shall be applied to the Russian Federation.

4.3.All offers or questions about this Agreement, the user has the right to send Insiels users to the support service or by post address: 107078, Moscow, ul. Novoryazanskaya, 18, p.11-12 STEndhal BC LLC Inseyls Rus LLC.

Publication date: 12/01/2016

Complete name in Russian:

Limited Liability Company "Inseyls Rus"

Abbreviated name in Russian:

LLC "Inseyls rus"

Name in English:

Insales Rus Limited Liability Company (Insales Rus LLC)

Legal address:

125319, Moscow, ul. Academician Ilyushina, 4, Corp.1, Office 11

Mailing address:

107078, Moscow, ul. Novoryazanskaya, 18, p.11-12, STEndhal BC

Inn: 7714843760 PPC: 771401001

Bank details:

The popularity of catering points will never go out, for human laziness and love for food eternal. Indeed, not everyone, having placed the Salad "Metropolitan", the Kytlet in Kiev and the "Prague" cake for dessert, may afford to break into the store, in order to purchase everything you need, and bother in the kitchen, preparing for several hours. The harsh reality with the work, traffic jams and fatigue dictates its own rules, but it also wants to eat tasty. For these human weaknesses, many years have already earned enterprising people who managed to build a serious business at a successful kitchen. How to make a calculation of dishes in the dining room so as not to work in minus, or, on the contrary, do not scare potential customers with excessive prices? At the same time, golden hands are not enough for success, because the market and competition is dictated by their rules. It would seem - a dining room and dining room, what can you earn? However, the attachment of people to the classics, when they prepared another "book about tasty and healthy food", worth a lot.

On fingers

In truth, at the moment, the cost of the cost is overestimated, since the final price of the menu position is more logical to form on the basis of the tastes of people, demand and average market requests, however, for internal tracking, the costs and equalization of costs are still recommended.

For example, we take one of the most popular pastry French sample: the company uses high quality raw materials with a corresponding price tag, applies special equipment for the preparation of its products, which costs very expensive (for example, the same fully automated device for chocolate temper - to save on it It turns out, since it is fraught with failures and damage to expensive resources), rent the room with the necessary area and so on, so on. Calculation of dishes as on the palm, but they cannot reduce costs, as the quality, name and, as a result, demand, so you have to keep the bar. A evenly high margin on those positions that the roads themselves can also be delivered, and those 300% of the cost, which is hearing the population, simply mark. So what about? Consider the menu that the confectionery offers:

• yeast baking;
• cakes and pastries;
• candy Marshello.

The first and third position at cost if not penny, are close to this, while even half of the "wind" cannot be made on the cakes, it is impossible because of expensive resources. Therefore, the second position is sold significantly cheaper, and the difference is filled with buns and candy. Moral: The calculation of the cost of the dish is not always based on purchasing prices of its components.

Of course, the confectionery is different from the dining room, but the principle of working with end food products is similar.

Where to begin?

Particularly lazy can use ready-made online templates that can be found in the network everywhere, but they are too common and rude enough in counting. It will be more correct to bring the price to independently and adhere to them in the future, adjusting on the basis of demand. In order to remove the correct calculation of the dish in the dining room, you must have on your hands:

• the completed menu in which the list of dishes provided by the catering point will be specified;
• technological maps to each menu position;
• procurement prices of all products that participate in the preparation of the menu positions.

Menu

A small advice: when choosing dishes in the dining room, do not permanently. The very definition of this categorization point implies simple undispical food capable of calling nostalgia over the union times. In other words, no sushi. Yes, and the compilation of the calculation of dishes from the abundance of complex positions will be unlikely, it is certainly more minted. The list with the encyclopedia is difficult to support both professional and material levels, since the chefs-universal in the dining room are difficult to find, and maintain the required composition of products on an ongoing basis.

Technological maps

Under this term understand the document that contains information about all the features of the dish. It includes the following data (optional everything, part is selective):

• Term and specifics of storage of dishes. Conditionally: ice cream at a temperature of -18 ...- 24 o with stored 3 months, while bread, at a temperature of +20 ... + 25 o C, 72 hours;
• the nutritional value of the finished dish: the amount of calories, in some cases - the ratio of proteins / fats / carbohydrates;
• requirements for the sale and submission of the finished dish;
• directly the recipe itself, which includes the composition and preparation algorithm;
• recipe source;
• description of the appearance, the principle of dishes decoration;
• the weight of the finished portion.

It is impossible to neglect the technological card, since the principles of work "Avos" and "on the eyes" will only be delighted until the first fine of the supervisory authorities.

You can get this document by two ways - to purchase ready-made you will be on the order, or withdraw yourself. The first frankly roads, and in the second there is nothing complicated that we will prove lower.

Example

Name of the menu item: Cutlet in Kiev.

Technological card number 47.

Dishes: roast.

Expected access to the finished dish (portion size): 310 grams.

Laying of products per 100 grams of finished dishes:

• chicken fillet purified - 29.82 grams;
• creamy oil - 14 grams;
• egg chicken - 3.27 grams;
• bread from the top of the top grade is 8.88 grams. The expected mass of the semi-finished product at the exit - 50.35 grams;
• for roasting - 5.21 grams;
• garnish bean (Technological card number 741) or potato (Technological card No. 42) - 52.08 grams.

dishes, its chemical composition and calorie, recipe

The chicken chicken fillet stuffed with butter, dip in the eggs, duly panic in the hammer of white bread, roasted in a hot fryer about 6-7 minutes before the formation of a crust of a saturated golden color. They lay out onto the bakery sheet and bring to readiness at a temperature of 200-220 o C in the oven. Products optionally fed on heated crings. Garnish default bean or vegetable.

Procurement prices for products

The item without which the calculation of the dish in the dining room is impossible. Ideally, it is worth adding transportation costs to them if the raw material brings no supplier, and you yourself, with the mediation of transport companies or own forces. Also consider both the means spent on loading / unloading if these services are paid separately.

The principle of calculation

Having the above-described information on the hands, it remains small.

It is necessary to specify the name of the dish, on the basis of the technological map, put those products that are required, in the desired quantity, indicate the bred purchasing prices and sum up. That's all, you received the cost of dishes.

Go to practice

Calculation of dishes (example - all the same cutlet in Kiev, prices take medium in the capital):

• chicken fillet purified - 29.82 grams, where 1000 grams cost 180 rubles;
• GOSTA) - 14 grams, where 1000 grams cost 240 rubles;
• egg chicken - 3.27 grams, where 1000 grams cost 120 rubles;
• bread from the top grade flour - 8.88 grams, where 1000 grams cost 60 rubles;
• For roasting - 5.21 grams, where 1000 grams cost 80 rubles;
• garnish bean (Technological card number 741) or potato (technological card number 42) - 52.08 grams, where 1000 grams cost about 50 rubles.

As a result, we get:

• chicken fillet, peeled from the skin and bones - 5,37 rubles;
• creamy oil (present, made according to GOST) - 3.36 rubles;
• egg chicken - 0.4 rubles;
• bread from the flour of the highest grade - 0.54 rubles;
• fat culinary for roasting - 0.42 rubles;
• garnish Bob (Technological Card No. 741) or Potato (Technological Card No. 42) - 3,12 rubles.

Thus, we obtain the calculation of the dish in the dining room "Cutlet in Kiev": the cost of 100 grams of portions is 13 rubles 20 kopecks.

By the same principle, the calculation of all items prescribed in the menu, including side dishes, desserts and beverages.

Of course, prices are unstable, and rewrite the cost manually from time to once more intact, so you can create dishes templates in any program that allows you to count, the same Microsoft Excel at least. Just drive the components, prescribe the calculation formula and correct the purchase price when it is changed.

If an automated accounting is planned, then all elementary - almost all trade programs, "sharpened" under public catering systems have the option "Calculation of dishes". Moreover, it is disclosed not only in the possibility of a pavement of the relevant purchase price of ingredients by the appropriate lines - also carried out, in real time, movement and write-off. Thanks to this, it is always step by step can be traced where, figuratively speaking, "2 kilograms of oil disappeared."

Practical use

As mentioned earlier, the calculation of the calculation at the moment only indirectly affects its selling price, since the latter is influenced by a number of characteristics, including the average market average, resources spent on the remaining menu items, as well as banal needs How to ensure the full functioning of the dining room. The latter indicates that level of prices that need to be maintained for the profitability of the enterprise in general.

By and large, it was the dining room that is a fairly profitable company, since a standard list of dishes, which is usually in honor of this kind of establishments, is distinguished by a frankly short procurement price without losing their useful qualities. Conditionally speaking, on the preparation of the same Vinegret or a brideller leaves a minimum of funds, and the love of people near the people is close to the concept of "eternity". Calculation of dishes is able to show the organization's accounting, how profitable are those or other positions of the range, whether to make something new or, on the contrary, remove the dishes that they do not pay off.